Antenna removal + scrap metal recovery · Toronto & GTA pilot

ROOFTOP ANTENNA REMOVAL.

We remove obsolete TV antennas, satellite dishes, masts and mounts from residential roofs in Toronto and the GTA. Material is separated by type and sent to scrap yards or approved processors.

Standard pickup: $0. Pilot service is subject to access, weight and roof-safety review. Scrap rates shown below are estimates, not quotes.

  • No standard haul charge
  • Photo-based route review
  • Metal sorted by type
Al · 55% Cu · 5% St · 35%
Pilot route · Toronto Booking

Electric pickup for smaller residential loads.

2e-bikes
250 lbtrailer load
0 Ldiesel burned

The 100 km yard view is a planning tool. Confirm access and route availability before booking.

Scroll to the signal

Est. 2026 · Toronto, ON

Remove the antenna.
Recover the metal.

“The value is in the material, not in the antenna staying on the roof.”

Older TV, radio and satellite equipment is often left in place because removal is inconvenient. The equipment contains recoverable aluminum, copper and steel, but the actual value depends on weight, grade, contamination and current yard pricing.

The pilot is designed around an electric cargo bike, battery tools and short residential routes. That is an operating plan, not a certified carbon offset.

01

Assess the roof first

We review a location and photo before confirming whether the equipment can be removed safely.

02

Use the right load limit

The planning model uses a 250 lb trailer capacity. Larger or structural jobs need a separate assessment.

03

Record the material

Loads are weighed and separated into aluminum, copper, steel and e-waste before sale or processing.

Antenna teardown / 01Typical yagi
Aluminum elements Copper feedline Steel mast WEIGH → SORT → RE-MELT
Avg. recovery≈ 60 lb / antenna
0Metal diverted from landfillYear-one target
0CO₂e avoidedvs. primary metal production
0Truck trips replacede-bike routes per year
0Diesel burned by our fleetZero tailpipe emissions

How a pickup
actually works.

Send the location and a photo. We review access, confirm the scope, remove the equipment, and document the material recovered.

01

Request a pickup

Send the address and photo.

Homeowners, installers and estate managers send the address, equipment type and a photo. Standard residential pickup is free in the pilot area; non-standard work is quoted before booking.

2 min form
02

Bike rolls up

Quiet tools, steady feet.

If the route is accepted, the crew arrives with battery tools and the planned vehicle. A 250 lb trailer load is the current operating assumption, not a promise for every roof.

0 L fuel
03

Sort & strip

Every metal finds its lane.

Aluminum elements, copper feedline, steel masts and small electronics such as LNBs are separated. Final payment depends on the material grade and the receiving yard.

Weighed
04

Back to the economy

Material goes to a receiving yard.

Sorted metal is offered to local yards or processors. The site does not treat the recovery estimate as a certified emissions reduction.

Re-melt
One average pickup60 lb
→
Recovered metal value≈ $56
→
Your haul fee$0

Planning average for a mixed TV / satellite antenna. Final weight is confirmed on site.

Small roof.
Measurable lift.

Move the sliders. The math updates against a blended recovery model: 55% aluminum, 35% steel, 5% copper and 5% e-waste.

1200
3 lb25 lb
How we count

4.3 kg CO₂e saved per lb of recycled aluminum, 0.9 kg per lb of copper and 0.68 kg per lb of steel versus primary production. Truck trips assume a 250-lb trailer load.

Aluminum55%
Steel35%
Copper5%
E-waste5%
CO₂e avoided / year 6,355 kg
Metal returned to the economy2,400 lb
Equivalent trees planted303 trees
Diesel truck trips replaced10 trips
Diesel never burned114 L

Estimates use management assumptions and industry-average secondary-versus-primary energy intensities. They are directional, not a certified carbon offset.

What the metal is worth
where you actually are.

Looking for a scrap price near me? Enter the estimated pounds of aluminum, copper and steel. The calculator applies indicative pilot rates and lists yards within 100 km of the selected location.

Showing yards within 100 km of Toronto. Rates are indicative, not a quote.

Your load 68 lb 40 lb Al · 3 lb Cu · 25 lb St
★ Highest listed estimate $65.51

This is the highest listed estimate for the entered load. It is not a guaranteed quote; standard residential pickup is shown at $0 in the pilot area.

Request a pickup
Yard radarToronto · 100 km
Best offer Listed yard You

Pilot rate book: yard names and rates are illustrative for product demonstration, based on November 2026 Canadian planning assumptions. Confirm current local pricing before relying on a payout. Grade, contamination and demand change the cheque.

Indicative scrap
rates by material.

Aluminum55% of intake
$1.00 CAD/lb

Typical antenna elements, booms and dishes. Actual grade and yard acceptance determine the final price.

Yagi elementsDishBoom
Copper5% of intake
$7.42 CAD/lb

Feedline and coax can be valuable by weight, but insulation, grade and contamination affect the rate.

CoaxFeedlineNo.1 bright
Steel35% of intake
$0.13 CAD/lb

Masts, mounts and hardware are usually lower-value steel. Weight and yard policy determine whether collection is economical.

MastMountsHardware
Blended intake value$0.94 / lb

Rates are planning inputs for the pilot. Scrap prices change by yard, grade, demand and date; confirm the current rate before relying on an estimate.

Request rooftop
antenna removal.

Send the address, antenna type and a photo. We will confirm access, scope and whether the standard pilot pickup applies before scheduling.

  • 01
    Send the basics

    Location, antenna type and a photo if you have one.

  • 02
    We confirm the route

    A real person checks access, weight and timing before we roll.

  • 03
    Pickup day

    Battery tools, protective mats and a written scope. We do not cut structural steel or perform roofing repairs.

Step 1 of 3

Where's the antenna?

Would you actually
use this?

One tap, no name, no email. This local tally is stored in your browser — it's a preview of the pilot survey, not a shared live poll.

No answers yet. Yours would be the first.

Before we
roll up.

Questions about scrap metal pickup, antenna removal or the pilot area? Email mitchellzfrp@gmail.com.

Standard residential pickup is free in the Toronto and GTA pilot area when the material value supports the route. Crane work, steep commercial roofs, towers and other non-standard jobs are quoted before booking.

TV yagi antennas, satellite dishes, ham and scanner antennas, masts and most rooftop mounts. We also take the coax and LNBs. If it's structurally part of the building or contains asbestos, we'll tell you what needs a specialist.

We use roof mats, fall protection and battery tools, and we photograph the mount before and after. We don't cut structural steel or patch roofing — if a mount needs a roofer, we say so before the visit.

The pilot is currently planned for Toronto and the surrounding GTA. Hamilton, Kitchener–Waterloo, Ottawa and Montreal are planning areas, not confirmed service territories. Enter a city or postal code to see listed yards in the calculator.

Loads are weighed and separated into aluminum, copper, steel and small electronics. Materials are offered to yards or processors that accept the grade. Ask Wyatt for a recovery summary after a completed pickup.

For a standard exterior antenna, usually not — but we need safe roof access and a way to confirm the work. We'll agree the details when we confirm the route.

Need the antenna
off the roof?

Toronto/GTA pilot · standard residential pickup subject to route and roof review.

Request a pickup